with Exhibition and Pre-Session on Thermal Energy in Hungarian
"THERMO-BRIDGE"
between East and West for technology transfer and information exchange
web site: www.dsy.hu/thermo



Scientific Society of Measurement,Automation and Informatics (MATE)
Branch of Thermal Engineering and Thermogrammetry (TE and TGM)
MATESecretariat:H-1372 Budapest, POB. 451.,Hungary
House of Technology, Budapest V.,Kossuth Lajos tér 6-8.III.318.
Phone:+361-332-9571, Fax:+361-353-1406
E-mail: mate@mtesz.hu

SITE MAP PUB13P01 S1I S2C S3M S4R S5TM S6H S7IR

S8T

SESSION

PUB12
SESSION OF THE CONFERENCE DECLARATION

Plenary lectures / Plenáris előadások

P01

1/1

 I. Dincer, M. M. Hussain(Dpt. of Mech. Engng., KFUPM,Dhahran, Saudi Arabia):
 Modelling of two-dimensional heat and moisture transfer during drying of cylindrical products		 P01

2/2

L.I. Kiss, T. Meenken(Université du Québec a Chicoutimi, Québec, Canada):
Determination of fast changing heat fluxes along the surface a water-film cooled ingot

P02

Infrared imagery and analysis/ Infravörös képalkotás és képfeldolgozás

S1I
3/1 I. Benkö (Budapest Univ. of Technology and Economics, Hungary):
 Analysis of thermal bridges of building structures through infrared thermograms		 S1I01
4/2 D. Bisorca, I. Ionel,F. Popescu, S. Ionel, C.Ungureanu (Univ.Politehnica Timisoara, Romania):
Air quality investigation by means of remote sensing with application to CO thermodynamic measurements in the city of Timisoara		 S1I02
5/3 I. Boras,S. Svaic (Univ.of Zagreb, Fac. of M.E. and Naval Arch., Croatia):
Thermography and 3D numerical method - a tool for determination the material thermal properties		 S1I03
6/4 M. Honner, P. Litos (Dpt. Thermomech. of Techn.Processes, N.T.R.C., Univ. of West Bohemia, Pilsen, Czech Republic):
Thermographic analysis of the hot-air soldering of the electronic circuit board		 S1I05
7/5 Z.Hrytskiv,V. Hoy, P.Kondratov( Lviv Polytechnic National University, Lviv, Ukraine):
Optimization of scannig mode for pyroelectric vidicon based thermal imaging cameras		 S1I06
8/6 S. Panier1, Ph. Dufrénoy2, P.Brémond3(1Ecole des Mines de Douai; 2Ecole Polytechnique Univ. de Lille,Villeneuve d’Ascq; 3CEDIP Infrared Systems, Croissy Beaubourg, France):
 Infrared characterization on thermal gradients on disc brakes		 S1I07
9/7 B. Wiecek, R. Danych, S.Zwolenik (Techn. Univ.of Lodz, Inst. of Electronics, Lodz,Poland):
 Infrared systems for fast thermal process investigation		 S1I08
10/8 A.Wyckhuyse, X. Maldague (University Laval, Quebec city, Canada):
 Infrared thermography for wood decay detection		 S1I09
Combustion and environmental protection/ Égéstechnika és környezetvédelem

S2C
11/1 S. A. Aipshtein,E.G.Gorlov, A.A. Laktionov-Mandelshtam, I.V.Safonov(Institute of Fossil Fuels, Moscow, Russia):
 Method of the quantitative and qualitative analysis composite fuels		 S2C01
12/2 J.B. Yebras, J.M. Aranda, J. Melendez, A.J. de Castro, F. Lopez ( LIR-Univ.Carlos III. de Madrid, Leganes, Spain):
Leak detection by infrared spectral imaging		 S1I10
13/3 Y. Ajabshirchy, V.Pirouzpanah, I. Randjbar, A.Mohebby (Univ. of Tabriz, Tabriz, Iran):
 Experimental investigation of effect of different locations of cold EGR fluid on performance and pollutant
in carburated SI engines		 S2C03
14/4 S. Dhimdi,P. Vandevelde(Univ. of Ghent, Lab. of Heat Transfer and Fire Safety, Belgium):
 Dimensionless formulation for heat and smoke evacuation		 S2C04
15/5 V. V.Ghia( Inst. of thermal engines, Univ. Politechnica of Bucharest, Romania):
Burning improvement of water-in heavy oil emulsion using combustion simulation		 S2C05
16/6 V.Goutiere1,L. I. Kiss2, W.Stevens1, G.Walter2 (1Alcan Inc., Arvida R&D Center,Jonquiere, Qc, Canada, 2Université du Québec a Chicoutimi, Québec,Canada):
Application of modern modeling tools for industrial burner characterizations		 S2C06
17/7 B.O. Kashani(Univ. of Birjand, Birjand, Iran):
Consideration of the valve timing effect on performance and pollutants emission in dual-fuel Diesel engines		 S2C07
18/8 A. Liazid, M. Guen,B. Kerboua (Labor.L.T.E.-ENSET Oran, Algeria):
Mathematical model of unsteady mechanical characteristics of a diesel engine		 S2C08
19/9 L. Mihaescu, T. Prisecaru,A.S. Ene, M. Prisecaru (Politehnica University of Bucharest, Bucharest, Romania):
 Experiments and numerical simulations upon burning process of coal and wood biomass mixture in a pilot furnace
of 2.5 MWt		 S2C10
20/10 M.R. Modaress-Razavi*, G.A. Karim **(*Ferdowsi Univ. of Mashhad, Mashhad, Iran, **Univ. of Calgary, Dpt. of Mech.Engng.,Calgary, Alberta, Canada):
 Examination of the dual-fuel engine performance using low BTU gaseous fuels		 S2C11
21/11 V. Pirouzpanah, K.Eisazadeh (Univ. of Tabriz, Tabriz, Iran):
Effect of fuel cetane number on fuel consumption and emission characteristics of an indirect-injection diesel engine 		 S2C12

Medicine and biology / Gyógyászat és biológia

S3M
22/1 K.Ammer  (Ludwig Boltzmann Research Inst. for Physical Diagn., Hanuschkrankenhaus, Vienna, Austria):
Temperature of hot packs for medical treatment		 S3M01
23/2 A.K.Habboub(HON Techn.Inc.,Division of HON INDUSTRIES, Muscatine, IA, U.S.A):
Thermal evaluation of body support systems using thermogrammetry and interfacial temperaturte sensing		 S3M02
24/3 G.J. Köteles (National Res. Inst. for Radiobiology and Radiohygiene, Budapest), I.Benkö (Budapest Univ. of Technology and Economics, Hungary):
Infrared picture analysis in the field of radiation biology		 S3M03
25/4 P.Murawski, A. Jung, J.Zuber, B. Kalicki (Thermology Lab. of Dpt. of Paediatrics, Military Medical Inst. Warsaw, Poland):
An extendable database for thermal images archiv, project and realization		 S3M04
26/5 E.F.J.Ring (School of Computing,Univ. of Glamorgan, Pontypridd, U.K.):
History of quantitation of thermography		 S3M05

Renewables/ Megújuló energiaforrások

S4R
27/1 A. Bilgin, S. Caran, A.Bolatturk (Suleyman Demirel Univ., Fac. of Engn. and Arch., Isparta, Turkey):
Geothermal resurces and mineral waters in Isparta and surrounding area		 S4R01
28/2 A.Eltez,N. Özbalta, A. Güngör (Ege Univ., Bornova-Izmir, Turkey ), M. Eltez(Mugla Univ., Kotekli-Mugla,Turkey):
Thermodynamical test procedure of solar box cookers		 S4R02
29/3 A. Güngör, N. Özbalta (Ege Univ., Izmir, Turkey ):
Design of a greenhouse for solar drying of sultana grapes and experimental investigation on it		 S4R03
30/4 A. Durmus, A. Akbulut, F.Gulcimen (Univ. Of Firat.Firat, Turkey):
 Exergy analysis of biogas reactor with solar energy heat controlling and phase change material		 S4R04

Thermomechanics and defectometry / Hőmechanika és hibafeltárás

S5TM
31/1 S.P. Gadaj, W. K. Nowacki, E. A. Pieczyska (Inst. of Fundamental Techn. Res. of PAS, Warsaw, Poland):
Thermal and mechanical characteristics during simple shear of materials		 S5TM01
32/2 C. Gruss, B.K. Bein*(IEE SA, Echternach, Luxembourg;*Inst. for Experimental Physics III., Ruhr Univ., Bochum, Germany):
Study of transient oxidation using the modulated beam reflection technique		 S5TM02
33/3 G.Kurilenko (Novosibirsk State Technical University, Novosibirsk, Russia):
Non-destructive check up of fatigue durability on the basis of thermal phenomena		 S5TM04
34/4 E. A. Pieczyska, W. K. Nowacki, S.P. Gadaj (Inst. of Fundamental Techn. Res. of PAS, Warsaw, Poland):
Polymers – interesting aspects of thermomechanical couplings during relaxation processes 		S5TM06
35/5 G. Riegert, *G. Kunz, *R.Nothhelfer-Richter, G. Busse (IKP-ZFP, University of Stuttgart; *Forsch. Inst. f.Pigmente u. Lacke, Stuttgart,Germany):
Early detection of corrosion damage under coatings with thermographic methods		 S5TM07
36/6 A.Can*, E. Buyruk**, Y. Can*** (*Trakya Univ., Edirne; **Cumhuriyet Univ., Sivas; ***Istanbul Techn. Univ., Istanbul, Turkey):
Heat bridges effects on heat loss and heat gain at buildings		 S5TM08

Heat and mass transfer / Hő- és anyagátadás

S6H
37/1 B. Al-zgoul (Al-Balqa Applied University, Tafila, Jordan):
Heat exchange during the process of ice production on the outer surface of the pivotal crystallizer		 S6H01
38/2 T. Ayhan, M. B. Nabhan(Univ. of Bahrain, Kingdom of Bahrain), A.Tandiroglu (Ataturk Univ., Erzincan, Turkey):
Channels with baffles and their turbulent heat transfer, pressure drop and enhancement		 S6H02
39/3 C.Biserni, E. Lorenzini (Univ.of Bologna, Italy),A. Fichera, A. Pagano (Univ. of Catania, Catania,Italy):
Experimental analysis of the dynamics of system exhibiting vapotron effect		 S6H05
40/4 G.Desrayaud, M. Marcoux (Univ. De Picardie Jules Verne, Saint-Quentin,
France), A. Fichera, A. Pagano (Univ. of Catania, Catania, Italy)
Analytical model for natural convection in a rectangular cavity with heated vertical walls		 S6H06
41/5 M.-G.Kang (Andong Nat. Univ., Kyungbuk, Korea):
Effects of tube inclination on nucleate pool boiling heat transfer		 S6H07
42/6 Y. Kaptan, E. Buyruk,A. Can*, A. Fertelli(Cumhuriyet Univ., Sivas; *Trakya Univ., Edirne, Turkey):
Numerical investigation of heat transfer and flow sturctures of circular and elliptical tubes in forced convection 		S6H08
43/7 N. Akbaba, A. Arisoy, F. Ozguc (Istanbul, Technical Univ., Fac. of Mech. Engng. Istanbul, Turkey):
Theoretical study of the effect of moisture on coal drying		 S6H09
44/8 I. Szucs, A. B. Palotas, L. Papp* (Universityof Miskolc, Miskolc-Egyetemváros, *Dunaferr Steel Works Ltd., Dunaujvaros, Hungary):
 Determination of refractory lining thickness of high temperature equipment using Thermovision 		S6H10

Infrared radiation/ Hősugárzás

S7IR 

45/1 I. Biris, Cr. Deac, A. Voicu (Techn.University of Cluj-Napolca, Romania):
Radiative heat exchange intersification in heating furnaces 		 S7IR03
46/2 G. Cuccurullo, F. Santoro(Univ. of Salerno, Fisciano, Italy), V. Pierro (Univ.of Sannio, Benevento, Italy):
A procedure for measuring microwave penetration depth		 S7IR04
47/3 K.-D. Gruner (Raytek GmbH,Berlin, Germany):
Modern infrared thermometers – trends and applications		 S7IR05
48/4 C. Gruss, R.Huttner**, B.K. Bein* (IEE SA,Echternach, Luxembourg; *Inst.for Experimental Physics III., Ruhr Univ., Bochum, Germany;**Whirpool, Technology Center,Schondorf, Germany):
Theoretical and experimental analysis of a photothermal modulation technique for application to moving samples		 S7IR06
49/5 B. Soroka, V. Zgurskyy, K.Pyanykh (Gas Institute, Kiev, Ukraine):
Development of the Monte-Carlo method to predict radiative heat transfer within the boilers and furnaces		 S7IR07
50/6

B.Wiecek, (Techn. Univ. of Lodz, Inst. of Electronics, Lodz,Poland):
Quantum-well versus thermal detectors

S7IR08
51/7

J.L.Tissot, J.P. Chatard, S. Tinnes, B. Fieque (ULIS, BP21-38113 Veurey-Voroize, France):
 320x240 uncooled microbolometer 2D array for radiometric appications

S7IR09

Thermotechnics/Hőtechnika

S8T
52/1

M. M.Abu-Khader (Al-Balqa Applied University, Amman, Jordan):
Mathematical expressions of temperature disturbances through two heat exchangers in series

 S8T01
53/2

 A.Galovic, M.Zivic*, B. Halasz (*Univ. of Osijek,Slavonski Brod, Croatia; Univ.of Zagreb,Fac. of M.E. and Naval Arch., Croatia):
The analysis of the entropy production and heat transfer efficiency of a crossflow heat exchanger

S8T04
54/3

Gy.Grof (Budapest Univ. of Technology and Economics, Hungary):
 An evaluation procedure in determining the thermal diffusivity in use of the flash method

 S8T05
55/4

B.Halasz, M. Tadic, S. Mudrinic (Univ. of Zagreb, Fac. of M.E. and Naval Arch., Croatia):
Analysis of the entropy production in a counterflow cooling tower

 S8T06
56/5

 S. Khandekar, M. Groll (IKE, Univ. of Stuttgart, Germany):
Pulsating heat pipes: study on a two-phase loop

 S8T07
57/6

V.Nikulshin1,C. Wu 2,M. Bailey 3, V. Nikulshina 4 (1Odessa Nat. Polytechnic Univ. Ukraine; 2U.S. Naval Academy,Annapolis;3
U.S. Military Academy, New York; 4Odessa State Academy of Refrigeration):
 Optimization of heat exchanger networks on thermoeconomical graphs

 S8T08
58/7

S.Torii, W.-J. Yang*(Kagoshima Univ., Kagoshima, Japan, *The Univ. of Michigan,Ann Arbor, Michigan, U.S.A.):
Non-Fourier conduction in a thin film using MacCormak's predictor-corrector numerical scheme

 S8T10
59/8

W. Bauer,J. Bauer(Univ. Duisburg-Essen, Duisburg, Germany):
 Calculation of the unsteady heat conduction in multi-layer walls

 S8T11
60/9 W.Bauer, M.Rink, K. Smit (Univ. Duisburg-Essen, Duisburg, Germany):
 Spectral emissivities of graphite		 S8T12
61/10

W. Bauer,T. Funke (Univ. Duisburg-Essen,Duisburg, Germany):
Optimization of the construction of multi-layer furnace walls for steady-state heat transfer conditions

 S8T13
 
SITE MAPPUB13P01 S1I S2C S3M S4R S5TM S6H S7IR

S8T

SESSION

PUB12

18-20 June, 2003, Budapest,Hungary

OSSKI Center (Törley Palace)
"Fodor József"National Center of Public Heath
"Frédéric Joliot-Curie" National Research Institute for
Radiobiology and Radiohygiene. (OKK-OSSKI)
www.osski.hu


Design: Dsy
Dsy Web Studio
Sandor Komaromi
E-mail: kms@dsy.huorkms@hp.osski.hu
Minden jog fentartva ! - A rendezvény MATE szervezésében és az OKK-OSSKIközreműködésével támogatásával jött létre.
Oldalakat publikálta - Published by Dsy Web Studio
All right reserved ! - The conference came into existence with organization of MATE and with support of OKK-OSSKI.